Overview

Model: MP21-11

This explains a few simple differences between the Manpa Belt Cutter and the Multi Cutter, for both Master and Basic models.

1. Belt Cutter (aka Multi Extension Mini Carver), accepts all Manpa 2” Cutters
2. 3” Multi Cutter (aka Multi Extension Standard Carver), accepts all Manpa 3” and 4” Cutters
3. Both Master models come with three extensions: 8”, 10-1/2” and 14” (200mm, 270mm and 348mm) long
4. Both Basic models come with one extension which is 8” 200mm long but can be extended in length by the addition of this Connection Tool.
5. The Connection Tool includes both extensions, 10-1/2” and 14” (270mm and 348mm) when you want to extend the length of either the Master Cutter or Basic Belt Cutter
6. You can also increase your diversity to be able use the full arsenal of 2”, 3” and 4” cutters on either Cutter by including either the 2” Head or 3” Head.
7. The 3” Head is recommended for the 3” Multi Cutter. You will then be able to use the full range of round, triangle and square 3" & 4" Cutters in addition to all the 2” Cutters - on the Multi Cutter!
8. Similarly, the 3” Head is recommended for the Belt Cutter. You will then be able to use the full range of round, triangle and square 2” Cutters in addition to the full arsenal of 3" & 4" Cutters on the Belt Cutter.

Both Belt Cutter and 3” Multi Cutter Basic models come with one extension which is 8” (200mm) long. With this Connection Tool, which includes two extensions,  they can each be extended in length by 10-1/2” and 14” (270mm and 348mm).  The Connection Tool includes both extensions, when you want to extend the length of either the Master Cutter or Basic Belt Cutter.

WHAT'S INCLUDED

Manpa Connection Tool Instruction Manual