These Hole Cutters are a highly unusual series of cutting tools. They virtually “drill” between approximately 2” to 3” diameter holes in wood using the great power of an angle grinder. Working with these different sized hole cutters adds a brand-new dimension to carving.
The 2-3/8” (60mm) Hole Cutter fits directly on a 4-1/2” (115mm) angle grinder (not included) with the included special adapter. Once they’re hooked up, the carving end is 7” (178mm) away from the head of the grinder. It can be further extended by another 5-1/2” (140mm) with the Sanding Tool MP21-12 so you can carve 12-1/2” (318mm) away from the grinder’s head. You’ll have tremendous reach when added to the length of your arms.
Fit to Angle Grinder (Angle Grinder not included)
- 3" Hole Cutter
- T9 Torx Wrench
- Special Adapter (M10, M14, 5/8"-11
Specifications & Features
- It allows power gouging in any direction
- Has three replaceable, tungsten carbide round teeth MP21-R-R83S
- Cuts round holes approximately 2-3/8” (60mm) in diameter
- Drill large holes for branches, makes unusual sculptures, large bowl cavities and much, much more!
- Inbuilt design of blade guide absorbs vibration and kickback reaction
- Use in a push/pull, up and down motion to carve deeper into wood
- Can be extended up to 22” (560mm) by using four (4) Sanding Tools MP21-12 for a phenomenal reach of 27-5/8” (458mm) from head of grinder
- A Grinder Holder MP21-9 can be added to reduce vibration and add 7 different handle positions
SAFETY TIPS & WARNINGS
- NEVER ATTACH ANY HOLE CUTTER TO A MULTI EXTENSION SHAFT – IT WILL DESTROY THE TOOL AND POTENTIALLY CAUSE SERIOUS INJURY.
- YOU CAN SAFELY JOIN TWO (2) SANDING TOOLS AT ANY ONE TIME TO A 2” AND 3” HOLE CUTTER.
- MANPA HAVE DEMONSTRATED USING UP TO FOUR (4) SANDING TOOLS ON A 2” HOLE CUTTER, MOUNTED ON AN ANGLE GRINDER. WE RECOMMEND THIS COMBINATION ONLY FOR EXCEPTIONAL CASES. E.G. HOLLOWING OUT EXTREMELY DEEP VESSELS OR EXTENDED STRAIGHT TUNNELING IN WOOD FOR ELECTRICAL WIRE OR TUBES/PIPES. USE CAUTION & CARE, BE IN CONTROL AND AWARE.
- USING FOUR (4) SANDING TOOLS EQUALS 22” (560MM) + 5 ⅝” HOLE CUTTER TOTALS 27 ⅝” (736MM). AGAIN, USE CAUTION & CARE, BE IN CONTROL AND AWARE.
- EXCEPT AS EXPRESSLY STATED HERE, THOUGH IT’S POSSIBLE, DO NOT USE DIFFERENT OR SAME TYPE EXTENSIONS TO FURTHER EXTEND YOUR ANGLE GRINDER OR POWER DRILL. OVEREXTENDING YOUR REACH WITH EXTENSIONS COULD RESULT IN LOSS OF CONTROL CAUSING DAMAGE TO TOOLS AND PERSONAL INJURY.