3" Multi Cutter - Bare Tool

Overview

The 3” (75mm) Multi Cutter is individually fitted to your own 4-1/2” angle grinder having a 5/8”-11NC center shaft. 

• Basic Multi Extension Mini Carver consists of 1- 8” (200mm) extension
• Highly recommended as a spare to fit different Manpa 3” and 4” accessories
• Fits 4-1/2” (115mm) slide switch angle grinders with 5/8”-11NC spindle thread (center shaft) - North American models
• A list of popular angle grinders with the highly recommended thumb controlled ON/OFF switch is shown in the Specifications and Features tab.
• We recommend FEIN at About FEIN
• Does not perform as well with paddle or kill switch grinders due to the design and fitment of the multi cutter
• Features multi angled positions from 90° to 180°
• Tool versatility, with extended reach and angles, will allow you to greatly improve your productivity and creativity
• Cuts incredibly fast, smooth and controlled, whether in pushing away or pulling toward you
• Can be used in a myriad of general carving applications
• Discover new designs with any of the round, triangle and square cutters

Important Note on Proper Attachment of any Multi Extension Carver to Your Angle Grinder

Included in every Belt Cutter and Multi Cutter are two adaptor rings with 42.50mm and 44mm diameter, that Manpa found fit all 4-1/2” grinders listed under SPECIFICATION AND FEATURES.  Another size ring with 41.50mm, fits the KAT recommended 40005 FEIN slide switch angle grinder. This ring may also fit other 4½” grinders with a 41.50mm flange but if you want the Fein from KAT it’s included. If you already own a Fein or another grinder with the same diameter flange, you’ll need this Adaptor Ring.

WHAT'S INCLUDED

1. Multi Cutter Head & 3" Safety Cover (Blades not included)
2. Body & Safety Cover
3. Wide Handle
4. 4" Safety Cover
5. Drive Gear
6. Adapter Ring 42.50 & 44.00
7. Star Wrench & L Wrench
8. Spanner
9. Timing Belt 200 XL

PDF INSTRUCTION MANUAL