This explains a few simple differences between the Manpa Belt Cutter and the Multi Cutter, for both Master and Basic models.
- Belt Cutter (aka Multi Extension Mini Carver), accepts all Manpa 2” Cutters
- 3” Multi Cutter (aka Multi Extension Standard Carver), accepts all Manpa 3” and 4” Cutters
- Both Master models come with three extensions: 8”, 10-1/2” and 14” (200mm, 270mm and 348mm) long
- Both Basic models come with one extension which is 8” 200mm long but can be extended in length by the addition of the Connection Tool MP21-11
- The Connection Tool includes both extensions, 10-1/2” and 14” (270mm and 348mm) when you want to extend the length of either the Basic Master Cutter MP21-3-B or Basic Belt Cutter MP21-2-B
- You can also increase your diversity to be able use the full arsenal of 2”, 3” and 4” cutters on either Cutter by including either the 2” MP21-2-H Head or 3” MP21-3-H Head.
- The 2” Head MP21-2-H is recommended for the 3” Multi Cutter. You will then be able to use the full range of round, triangle and square 3" & 4" Cutters in addition to all the 2” Cutters - on the Multi Cutter!
- Similarly, the 3” Head MP21-3-H is recommended for the Belt Cutter. You will then be able to use the full range of round, triangle and square 2” Cutters in addition to the full arsenal of 3" & 4" Cutters on the Belt Cutter.
Important Note on Proper Attachment of any Multi Extension Carver to Your Angle Grinder
Included in every Belt Cutter and Multi Cutter are two adaptor rings with 42.50mm and 44mm diameter, that Manpa found fit all grinders listed under SPECIFICATION AND FEATURES. We also found that another size ring with 41.50mm, fits the KAT recommended FEIN angle grinder but is not included. This ring may also fit other 4½” grinders with a 41.50mm flange. Don’t get frustrated! Please check beforehand and call KAT. If you own a Fein or another grinder with the same diameter flange, you’ll need this adaptor ring MP21-R-SR41.50
2. Body & Safety Cover
3. Wide Handle
4. Drive Gear
5. Adapter Ring 42.50 & 44.00
6. Star Wrench & L Wrench
8. Timing Belt 200, 270, 348 XL
9. 2 Extension Tools (270, 348 mm)
Specifications & Features
- Model MP21-2-M Angle Grinder Is Not Included
- This is the most complete and smallest Multi Extension Carver of the series
- It consists of 3 different length extensions which are individually fitted to your angle grinder and I – 2” Circular (Round) Cutter
- This Multi Cutter only fits 4-1/2” (115mm) angle grinders with 5/8”-11NC spindle thread (center shaft) to primarily fit North American models.
- A list of popular angle grinders with a highly recommended thumb controlled ON/OFF switch is shown in the Specifications and Features tab. Does not perform as well with paddle or kill switch grinders due to the fitment of the multi cutter.
- While many users are familiar with King Arthur’s Tools Merlin2 Miniature Angle Grinder variable speed control for precision 2” cutting, carving and shaping, these Manpa accessories, fitted directly to the more powerful 4-1/2” angle grinder, extends your carving reach out up to 14” (348mm) from the head of the grinder
- Many Merlin2 cutting and carving accessories fit this model if you’re looking for more power
- Interchangeable using all 2” Manpa cutters, (round, triangle, square)
- It also features multi angled positions from 90° to 180°, depending on the grinder
- Highly recommended for professional carvers and turners
- Your versatility, with extended reach and angles, will allow you to greatly improve your productivity and creativity
- Cuts incredibly fast, smooth and controlled, whether in pushing away or pulling toward you
- The circular (round) cutter will carve in any direction
- Can be used in a myriad of general carving applications
- Discover new designs with any of the round, triangle and square cutters
- This set includes 3 Extensions to your 4-1/2” (115mm) Angle Grinder
- 8”, 10-1/2” and 14” (200mm, 270mm, 348mm)
- Plus 1 – 2” Circular Cutter 6mm
Popular North American Grinders (Thumb Controlled ON/OFF Switch Strongly Recommended)
Bosch: 1375A, GWS8-45, GWS9-45, GWS18V-45
Makita: GA4030K, GA4030, GA4530K, GA4530, GA4534, GA4530X, 9556NB, 9557NB, 9558PB, 9557PB, 9565PCV, GA4542C, XAG042Z, XAG09Z, XAG11Z, XAG16Z, XAG20Z, XAG17ZU, XAG21ZU.
DeWalt: DCG405B, DCG412B, DWE4011, DWE4012, DWE4120, DWE4120N
Milwaukee: 2783-20(22,22HD), 2781-20(21,22,22HD), 2980-20(21-22), 2981-20(21,22)
Hitachi: G12SE2 Porter Cable: PC750AG